Electrical Machines Lab


This laboratory is utilized to practical implementation of the electric Machines course, as it is equipped with  Transformers, DC motors, induction motors, Synchronous motors, DC generators and Synchronous generators. Students can investigate practically the single-phase and three-phase characteristics and speed and torque characteristics and modeling for the available mentioned equipment’s.


List of equipment:

  • DC Shunt Motor with Loading Arrangement
  • DC Shunt Motor Coupled With Three phase Alternator
  • DC Series Motor with Loading Arrangement
  • DC compound Motor with Loading arrangement
  • DC Shunt Motor Coupled With DC Compound Generator
  • DC Shunt Motor Coupled With DC Shunt Generator
  • DC Compound Motor Coupled With DC Compound Generator
  • Three Phase Induction Motor with Loading Arrangement
  • Single Phase Induction Motor with Loading Arrangement
  • Three phase Slip ring Induction motor
  • Synchronous motor with loading arrangement
  • Induction Generator
  • Single Phase and three phase Auto Transformer
  • Single Phase and three phase Transformer
  • Single Phase and Three Phase Resistive Loading Bank
  • Three phase Capacitor Bank 
  • Three phase Inductive Load
  • Three phase water Load
  • Three phase Lamp load
  • Digital & Analog Tachometers
  • AC,DC Ammeters, Voltmeters, Wattmeters, Power Factor Meters & Double Element Watt meters, Rheostats, AC & DC Distribution Panel Boards

Lab In-charge

Mr. J. Velmurugan

Lab Instructor

Mr. G. Sivasankar

Area in Sq.mts

250

Batch size

30

Power Electronics & Drives Lab


This laboratory is utilized to simulate and practical implementation of the power switching circuits, power converters such as single and three phase half, semi and full converters, single phase and three phase inverter, chopper circuits and ac voltage controller circuits. Students can investigate practically the power switching devices SCR, TRIAC, MOSFET and IGBT characteristics.


  • Single  Phase SCR  Half &Fully  Controlled Converter
  • Three Phase SCR  Half &Fully  Controlled Converter
  • IGBT Based single phase PWM inverter
  • IGBT Based Three  phase PWM inverter
  • IGBT Based single phase PWM Chopper
  • Characteristics of SCR Kit
  • Characteristics of TRIAC Kit
  • Characteristics of IGBT& MOSTET
  • Transient Characteristics of SCR & MOSFET Kit
  • Resonant DC to DC Converter Kit
  • 1Ø Series Inverter
  • Step Down & Step Up MOSFET Based Choppers
  • Design Of Switched Mode Power Supplies
  • Design OF UPS
  • MC Muray bed ford inverter
  • 1Ø parallel Inverter
  • DSP Based motor controller with AC Drive
  • SCR  Voltage current commutation CHOPPER
  • MP Based Firing scheme for three phase converter
  • BOOST Converter
  • Study of Driver Circuit & Generation Of PWM signals 3Ø Inverter
  • DSPIC 30F 4011 Based PWM Controller
  • IGBT Module& MOSFET Module
  • “FLUKE” make Power Quality Analyzer with Calibration
  • R,RC,UJT Triggering circuit
  • Single phase AC voltage controller kit
  • Digital storage Oscilloscope (100MHZ,50 MHZ,60 MHZ & 2 Channel, 4 Channel)

Lab In-charge

Dr. R. Vimala

Lab Instructor

Mr. A. Nagarathinapandi

Area in Sq.mts

150

Batch size

30

Power System Simulation Lab


This laboratory is utilized to understand and analyze power system operation, stability, control and protection. In addition to that, it can be utilized to gain the basic knowledge on Object Oriented concepts through which the students can develop applications using Object Oriented Programming Concepts to solve real world problems. In order to achieve the above, this laboratory is well equipped with latest HP Business Desktops and soft wares like Mi-Power, PSPICE, Mathcad, Labview, PSCAD EMTDC, AutoCAD, C++ & JAVA.


  • HP Business Desktop, Intel core i3, 4 GB DDR3 RAM, 500 GB Hard Disk, 18.5’’ TFT LED Display – 63 No’s
  • Mi-Power Software Package  - 10 Users
  • PSPICE Software Package – 2 users
  • Mathcad Software Version 13 – 6 users
  • Labview  - 10 Users
  • PSCAD.EMTDC 4.1 Software - 10 Users
  • AutoCAD 2008 Electrical - 10 Users
  • Dell laptop – 1
  • MI Power Renewal(ASSC) – 1
  • Netgear 24 Port Ethernet switch – 1
  • VbiquitiNanostation m2-nsm2 – 4
  • Ciso 8Port 10/100 Mbps Switch – 1
  • D Link CAT 6 Cable box – 1
  • LG Portable DVD Writer – 2
  • HP 1020 Laser Jet printer – 1
  • Seagate 1 TB back plus external hard disk – 1
  • UBNT Nano station Wifi – 3
  • D-link 8 port Switch – 5
  • D-link 16 port Switch - 1

Lab In-charge

Dr. S.K. Nandha Kumar

Lab Instructor

Mr. K. Sathiyaprabhu

Area in Sq.mts

167.23

Batch size

60

Drives & Research Lab


The laboratory is well equipped with 23 computers with a net speed of 1 Gbps and will accommodate 56 students at a time. Additionally equipped with 8 working tables at which working modules are mounted on top. The laboratory is fully air-conditioned and has printer and also a projector for presentations and research audit meetings. In order to carry out the experiments for various laboratories in the curriculum of PG students, it is fully uploaded with micro controllers, DSP controllers, for electric drives and intelligent modules for controlling SRM and BLDC motors./p>


List of equipment:

  • Matlab Release 12.0 -15 users
  • Simulink -05 users
  • Control system simulink -05 users
  • Neural network tool box -05 users
  • Fuzzy logic tool box -05 users
  • Power system tool box- 05 users
  • DELL  Computer System(Intel Pentium IV Processor 3GHZ, 256x4MB RAM, 40GB Hard DriveCD Drive)- 03 No’s
  • DELL  Computer System
    • (Intel Pentium IV Processor 3GHZ, 256x4 MB RAM, 40GB Hard Drive  - 11  No’s
  • DELL  Computer System  (SERVER)(Intel Pentium IV Processor 3.6GHZ, 256x4MB RAM, 40GB Hard Drive- 01
  • PSIM Version 7.0 – 05 users
  • Dell Optiplex 330 Slim tower Desktop1GB RAM 160 Hard Disk – 06 NO’s
  • Dell Vostro 230 Slim tower Desktop 2 GB RAM 320 Hard Disk – 07 NO’s
  • HP 1020 Laser Jet printer – 01
  • DSPIC 30F 4011 based PWM Controller (micro 4011)
  • Three Phase IGBT Module.
  • DC Motor Load Set up.
  • Single Phase SCR Power Circuit Kit.
  • DSPIC 30F 4011 based PWM controller with v/f control technique.
  • 1 H.P 3 Phase AC Induction Motor with load Set up.
  • Space Vector PWM Technique.
  • 8051 Micro Controller kit with Stepper Motor.
  • TMS 320F 2812 based DSP Controller.(micro 2812)
  • 3 H.P. Intelligent Power Module.
  • 1 H.P. SRM Motor Eddy Current load setup.
  • VISSIM Software-single user.
  • JTAG Emulator.
  • Condition monitoring of Three Phase Induction Motor under fault conditioning kit.
  • VPE Spartan 3A/3A DSP FPGA Board.
  • Dual IGBT Module.
  • SCR Module
  • FPGA based MOSFET buck-boost converter.
  • (0-30V), 2A Power supply.
  • Design of Switched Mode Power Supplies:
  • DC-DC buck converter kit.
  • DC-DC boost converter kit.
  • DC-DC buck-boost converter kit.
  • DC-DC Fly back converter kit.
  • DC-DC Forward converter Trainer Kit.
  • DC-DC Push Pull Converter Trainer Kit.
  • DC-DC Series Resonant Converter Trainer Kit.
  • Isolation Transformer  (1φ , 4A, 1 KVA)
  • Isolation Transformer
  • (3φ, 4A, 1 KVA)
  • Auto Transformer
  • (1φ,  5A)
  • Auto Transformer (3φ, 5A)

Lab In-charge

Dr. I. Gerald Christopher Raj

Lab Instructor

Mr. J. Velanganni Sudhakar

Area in Sq.mts

167.23

Batch size

30

Control & Instrumentation Lab


To provide knowledge on analysis and design of control system along with basics of instrumentation.


List of equipment:

  • LVDT Trainer Kit
  • Lag Lead Network Kit
  • PID  Controller Kit
  • Pressure Measurement Trainer Kit
  • AC Servo Motor Speed Torque Kit
  • Audio Frequency Oscillator
  • 3MHZ Function Generator
  • Schering Bridge
  • Maxwell’s Bridge
  • DC Position Controller
  • AC Position Controller
  • DC Servo Motor
  • AC Servo Motor
  • Characteristics of Temperature Transducer
  • Hall Effect Transducer
  • Calibration of Current Transformer
  • Temperature Trainer Module
  • Analog to Digital Converter
  • Digital to Analog Converter
  • Synchro Transmitter and Receiver
  • Flow Measurement Trainer Kit
  • Optical Sensor Trainer Kit
  • Strain Gauge Transducer Trainer Kit

Lab In-charge

Mr. B. Pushpavanam

Lab Instructor

Mr. N. Natarajan

Area in Sq.mts

172.8

Batch size

30

Circuits & Devices Lab


The circuits and devices laboratory is a unit of the Electrical and Electronics Department. This laboratory will enable the undergraduate students to learn the basic concepts and techniques in the design and operation of common circuits relevant to the field of electrical and electronics. The learning objective in this laboratory is to supplement the theory course of Circuit theory, Electronic Devices and Circuits, Digital and Linear integrated circuits.


List of equipment:

  • Cathode Ray Oscilloscope (30 MHz).
  • Function Generator (3 MHz).
  • DC Dual Power supply (0-30 V/3 A).
  • DC Single Power supply (0-30 V/3 A).
  • Digital Trainer kit.
  • Decade Resistance Box.
  • Decade Capacitance Box.
  • Analog Voltmeter (Moving Coil).
  • Analog Ammeter (Moving Coil).
  • LCR meter.
  • Digital multimeter.

Lab In-charge

Mr. R. Joseph Rathish

Lab Instructor

Mr. A. Nagamuthu

Area in Sq.mts

130.98

Batch size

30