Electrical and Electronics Engineering

I Year - I Semester

C101	HS8151	Communicative English
C101.1	Students will be able to share information related to oneself / family & friends.
C101.2	Students will be able to develop general reading and free writing skills.
C101.3	Students will be able to develop grammar and language development skills.
C101.4	Students will be able to develop reading and language development skills.
C101.5	Students will be able to develop extended writing skills.

C102	MA8151	Engineering Mathematics - I
C102.1	Students will be able to use both the limit definition and rules of differentiation to differentiate functions.
C102.2	Students will be able to apply differentiation to solve maxima and minima problems.
C102.3	Students will be able to evaluate integrals both by using Riemann sums and by using the Fundamental Theorem of Calculus.
C102.4	Students will be able to apply integration to compute multiple integrals, area, volume, integrals in polar coordinates, in addition to change of order and change of variables.
C102.5	Students will be able to apply various techniques in solving differential equations.

C103	PH8151	Engineering Physics
C103.1	Students will be able to study the basics of properties of matter and its applications.
C103.2	Students will be able to acquire knowledge on the concepts of waves, optical devices and their applications in fiber optics.
C103.3	Students will be able to gain adequate knowledge on the concepts of thermal properties of materials and their applications in expansion joints and heat exchangers.
C103.4	Students will be able to study advanced physics concepts of quantum theory and its applications in tunneling microscopes.
C103.5	Students will be able to understand the basics of crystals, their structures and different crystal growth techniques.

C104	CY8151	Engineering Chemistry
C104.1	Students will be able to study boiler feed water requirements, related problems and water treatment techniques.
C104.2	Students will be able to study about surface chemistry and catalysis.
C104.3	Students will be able to develop an understanding of the basic concepts of phase rule and its applications to single and two component systems and appreciate the purpose and significance of alloys.
C104.4	Students will be able to study the types of fuels, calorific value calculations, manufacture of solid, liquid and gaseous fuels.
C104.5	Students will be able to understand the principles and generation of energy in batteries, nuclear reactors, solar cells, wind mills and fuel cells.

C105	GE8151	Problem Solving and Python Programming
C105.1	Students will be able to know the basics of algorithmic problem solving.
C105.2	Students will be able to study data, expressions and statements in Python programs.
C105.3	Students will be able to develop Python programs with conditionals and loops, Python functions and call them.
C105.4	Students will be able to use Python data structures –- lists, tuples, dictionaries.
C105.5	Students will be able to study input/output with files in Python.

C106	GE8152	Engineering Graphics
C106.1	Students will be able to draw plane curves and develop free hand sketching.
C106.2	Students will be able to draw projection of points, lines and plane surfaces.
C106.3	Students will be able to draw projection of solids.
C106.4	Students will be able to draw projection of sectioned solids and surfaces.
C106.5	Students will be able to draw isometric and perspective projections.

C107	GE8161	Problem Solving and Python Programming Laboratory
C107.1	Students will be able to write, test and debug simple Python programs.
C107.2	Students will be able to implement Python programs with conditionals and loops.
C107.3	Students will be able to use functions for structuring Python programs.
C107.4	Students will be able to represent compound data using Python lists, tuples, dictionaries.
C107.5	Students will be able to read and write data from/to files in Python.

C108	BS8161	Physics and Chemistry Laboratory
C108.1	Students will be able to determine wavelength and particle size using laser and acceptance angle in an optical fiber.
C108.2	Students will be able to determine velocity of sound, compressibility of liquid, wavelength of mercury spectrum and thickness of a thin wire.
C108.3	Students will be able to determine thermal conductivity of a bad conductor, rigidity modulus using torsion pendulum and Young’s modulus by non uniform bending method.
C108.4	Students will be able to acquire practical skills in the determination of water quality parameters through volumetric and instrumental analysis.
C108.5	Students will be able to determine molecular weight of a polymer by viscometery.

I Year - II Semester

C109	HS8251	Technical English
C109.1	Students will be able to read technical texts and write area-specific texts effortlessly.
C109.2	Students will be able to develop strategies and skills to enhance their ability to read and comprehend engineering and technology texts
C109.3	Students will be able to strengthen their listening skill which will help them comprehend lectures and talks in their areas of specialization.
C109.4	Students will be able to foster their ability to write convincing job applications and effective reports.
C109.5	Students will be able to develop their speaking skills to make technical presentations, participate in group discussions.

C110	MA8251	Engineering Mathematics - II
C110.1	Students will be able to study eigenvalues and eigenvectors, diagonalization of a matrix, Symmetric matrices, Positive definite matrices and similar matrices.
C110.2	Students will be able to study gradient, divergence and curl of a vector point function and related identities, evaluation of line, surface and volume integrals using Gauss, Stokes and Green’s theorems and their verification.
C110.3	Students will be able to study harmonic conjugates, analytic functions, conformal mapping and bilinear transformation.
C110.4	Students will be able to study complex integration, singularities, residues, circular and semicircular contours.
C110.5	Students will be able to study Laplace transform and inverse transform of simple functions, properties, various related theorems and application to differential equations with constant coefficients.

C111	PH8253	Physics for Electronics Engineering
C111.1	Students will be able to gain knowledge on classical and quantum electron theories and energy band structuues.
C111.2	Students will be able to acquire knowledge on basics of semiconductor physics and its applications in various devices.
C111.3	Students will be able to get knowledge on magnetic and dielectric properties of materials.
C111.4	Students will be able to understand the functioning of optical materials for optoelectronics.
C111.5	Students will be able to understand the basics of quantum structures and their applications in spintronics and carbon electronics.

C112	BE8252	Basic Civil and Mechanical Engineering
C112.1	Students will be able to impart basic knowledge on Civil and Mechanical Engineering.
C112.2	Students will be able to study surveying and civil engineering materials.
C112.3	Students will be able to study building components and structures.
C112.4	Students will be able to study internal combustion engines and power plants.
C112.5	Students will be able to study refrigeration and air conditioning systems.

C113	EE8251	Circuit Theory
C113.1	Students will be able to study electric circuits and its analysis.
C113.2	Students will be able to solve circuit equations using network theorems.
C113.3	Students will be able to obtain the transient response of circuits.
C113.4	Students will be able to study phasor diagrams and analyze three phase circuits.
C113.5	Students will be able to understand the phenomenon of resonance and coupled circuits.

C114	GE8291	Environmental Science and Engineering
C114.1	Students will be able to study the environment, ecosystems and biodiversity.
C114.2	Students will be able to study about the environmental pollution.
C114.3	Students will be able to study the natural resources.
C114.4	Students will be able to study the social issues and the environment.
C114.5	Students will be able to study the human population and the environment.

C115	GE8261	Engineering Practices Laboratory
C115.1	Students will be able to fabricate carpentry components and pipe connections including plumbing works.
C115.2	Students will be able to do welding, basic machining and sheet metal works.
C115.3	Students will be able to understand machine assembly practices, foundry and fitting operations.
C115.4	Students will be able to make house wiring, fluorescent lamp wiring, stair case wiring and measure voltage, current, resistance, power, power factor and energy.
C115.5	Students will be able to study logic gates, generation of clock signals, soldering practices, half wave and full wave rectifiers.

C116	EE8261	Electric Circuits Laboratory
C116.1	Students will be able to verify Kirchhoff’s voltage and current laws.
C116.2	Students will be able to verify network theorems (Thevenin, Norton, Superposition and maximum power transfer theorems), study CRO and measure sinusoidal voltage, frequency and power factor.
C116.3	Students will be able to determine time constant of R-C electric circuits and frequency response of RLC circuits.
C116.4	Students will be able to simulate series and parallel resonant circuits.
C116.5	Students will be able to simulate three phase balanced and unbalanced star and delta circuits.

II Year – III Semester

C201	MA8353	Transforms and Partial Differential Equations
C201.1	Students will be able to study the mathematical tools for the solutions of partial differential equations.
C201.2	Students will be able to study the Fourier series analysis which is central to many applications in engineering apart from its use in solving boundary value problems.
C201.3	Students will be able to study the applications of partial differential equations that model several physical processes.
C201.4	Students will be able to study the Fourier transform techniques used in wide variety of situations.
C201.5	Students will be able to develop Z transform techniques for discrete time systems.

C202	EE8351	Digital Logic Circuits
C202.1	Students will be able to study various number systems, simplify the logical expressions using Boolean functions.
C202.2	Students will be able to study the implementation of combinational circuits
C202.3	Students will be able to design various synchronous and asynchronous circuits.
C202.4	Students will be able to study the asynchronous sequential circuits and Programmable Logic Devices.
C202.5	Students will be able to study the digital simulation for development of application oriented logic circuits.

C203	EE8391	Electromagnetic Theory
C203.1	Students will be able to study the basic mathematical concepts related to electromagnetic vector fields.
C203.2	Students will be able to study the concepts of electrostatics, electrical potential, energy density and their applications.
C203.3	Students will be able to study the concepts of magnetostatics, magnetic flux density, scalar and vector potential and its applications.
C203.4	Students will be able to study the concepts of Faraday’s law, induced emf and Maxwell’s equations.
C203.5	Students will be able to study the concepts of electromagnetic waves and Poynting vector.

C204	EE8301	Electrical Machines - I
C204.1	Students will be able to study the techniques of magnetic-circuit analysis and magnetic materials.
C204.2	Students will be able to study the constructional details, principle of operation, prediction of performance, methods of testing the transformers and three phase transformer connections.
C204.3	Students will be able to study the working principles of electrical machines using the concepts of electromechanical energy conversion principles and derive expressions for generated voltage and torque developed in all Electrical Machines.
C204.4	Students will be able to study the working principle, types and determination of characteristics of DC Generators.
C204.5	Students will be able to study the working principle, starting, methods of speed control and estimation of various losses of DC Motors.

C205	EC8353	Electronic Devices and Circuits
C205.1	Students will be able to study the PN junction devices.
C205.2	Students will be able to study the transistors.
C205.3	Students will be able to study the amplifiers.
C205.4	Students will be able to study the multistage and differential amplifiers.
C205.5	Students will be able to study the feedback amplifiers and oscillators.

C206	ME8792	Power Plant Engineering
C206.1	Students will be able to study the coal based thermal power plants.
C206.2	Students will be able to study the diesel, gas turbine and combined cycle power plants.
C206.3	Students will be able to study the nuclear power plants.
C206.4	Students will be able to study the concepts of power from renewable energy.
C206.5	Students will be able to study the energy, economic and environmental issues of power plants.

C207	EC8311	Electronics Laboratory
C207.1	Students will be able to study the characteristics of Semiconductor diode, Zener diode, NPN Transistor.
C207.2	Students will be able to study the characteristics of JFET, UJT, and Frequency response characteristics of a Common Emitter amplifier.
C207.3	Students will be able to study the photo diode, photo transistor, RC phase shift, LC oscillators.
C207.4	Students will be able to study the Single Phase half-wave and full wave rectifiers, Differential amplifiers.
C207.5	Students will be able to study the CRO for frequency and phase measurements and passive filters.

C208	EE8311	Electrical Machines Laboratory - I
C208.1	Students will be able to study the characteristics of DC shunt and compound generators.
C208.2	Students will be able to conduct the Load test on DC shunt, Series and compound motors.
C208.3	Students will be able to conduct Swinburne’s test, Hopkinson’s test on DC motor – generator set and speed control of DC shunt motor.
C208.4	Students will be able to conduct the Load test on single-phase and three phase transformers, Open circuit and short circuit tests, Sumpner’s test and Separation of no-load losses on single phase transformers.
C208.5	Students will be able to study the starters and three phase transformers connections.

II Year – IV Semester

C209	MA8491	Numerical Methods
C209.1	Students will be able to study the solution of equations and eigenvalue problems.
C209.2	Students will be able to study the interpolation and approximation.
C209.3	Students will be able to study the numerical differentiation and integration.
C209.4	Students will be able to study the initial value problems for ordinary differential equations.
C209.5	Students will be able to study the boundary value problems in ordinary and partial differential equations.

C210	EE8401	Electrical Machines - II
C210.1	Students will be able to study the construction and performance of salient and non – salient type synchronous generators.
C210.2	Students will be able to study the Principle of operation and performance of synchronous motors.
C210.3	Students will be able to study the construction, principle of operation and performance of induction machines.
C210.4	Students will be able to study the starting and speed control of three-phase induction motors.
C210.5	Students will be able to study the construction, principle of operation and performance of single phase induction motors and special machines.

C211	EE8402	Transmission and Distribution
C211.1	Students will be able to study the structure of electric power system and to develop expressions for the computation of transmission line parameters.
C211.2	Students will be able to obtain the equivalent circuits for the transmission lines based on distance and to determine voltage regulation and efficiency.
C211.3	Students will be able to understand the mechanical design of transmission lines and to analyze the voltage distribution in insulator strings to improve the efficiency.
C211.4	Students will be able to study the types, construction and methods to improve the efficiency of cables.
C211.5	Students will be able to study about distribution systems, types of substations, methods of grounding, EHVAC, HVDC and FACTS.

C212	EE8403	Measurements and Instrumentation
C212.1	Students will be able to study the basic functional elements of instrumentation
C212.2	Students will be able to study the fundamentals of electrical and electronic instruments.
C212.3	Students will be able to understand the comparison between various measurement techniques.
C212.4	Students will be able to study various storage and display devices.
C212.5	Students will be able to study various transducers and the data acquisition systems.

C213	EE8451	Linear Integrated Circuits and Applications
C213.1	Students will be able to study the IC fabrication procedure.
C213.2	Students will be able to study the characteristics; understand the importance of Signal analysis using Op-amp based circuits.
C213.3	Students will be able to study the applications of Op-amp.
C213.4	Students will be able to study about special ICs
C213.5	Students will be able to study the applications of ICs.

C214	IC8451	Control Systems
C214.1	Students will be able to understand the use of transfer function models for the analysis of physical systems and introduce the control system components.
C214.2	Students will be able to obtain adequate knowledge in the time response of systems and steady state error analysis.
C214.3	Students will be able to accord basic knowledge in open loop and closed–loop frequency responses of systems.
C214.4	Students will be able to study the stability analysis and design of compensators.
C214.5	Students will be able to study the state variable representation of physical systems and study the effect of state feedback.

C215	EE8411	Electrical Machines Laboratory - II
C215.1	Students will be able to study the regulation of three phase alternator by EMF, MMF, ZPF, ASA methods and three phase salient pole alternator by slip test.
C215.2	Students will be able to conduct load test, no load and blocked rotor tests on single phase induction motors.
C215.3	Students will be able to conduct load test, no load and blocked rotor tests on three-phase induction motors.
C215.4	Students will be able to study the v and inverted v curves of three phase synchronous motor.
C215.5	Students will be able to study the separation of no-load losses of three-phase induction motor and induction motor starters.

C216	EE8461	Linear and Digital Integrated Circuits Laboratory
C216.1	Students will be able to study the Boolean Functions, Adder/ Subtractor circuits and Code converters.
C216.2	Students will be able to study the Parity generators, Encoders and Decoders.
C216.3	Students will be able to study the Counters and Shift Registers.
C216.4	Students will be able to study the multiplexers, demultiplexers and Timer IC applications.
C216.5	Students will be able to study the Op-Amps, Voltage to frequency characteristics of NE/SE 566 IC and Variability Voltage Regulator using IC LM317.

C217	EE8412	Technical Seminar
C217.1	Students will be able to study advanced engineering developments.
C217.2	Students will be able to prepare and present technical reports.
C217.3	Students will be able to use various teaching aids such as over head projectors and power point presentations.
C217.4	Students will be able to use demonstrative models.
C217.5	Students will be able to face the placement interviews.

III Year – V Semester

C301	EE8501	Power System Analysis
C301.1	Students will be able to model the power system under steady state operating condition.
C301.2	Students will be able to apply numerical methods to solve the power flow problem.
C301.3	Students will be able to model and analyze the system under balanced fault conditions.
C301.4	Students will be able to model and analyze the system under unbalanced fault conditions.
C301.5	Students will be able to analyze the system stability and the transient behaviour of power system when it is subjected to a fault.

C302	EE8551	Microprocessors and Microcontrollers
C302.1	Students will be able to study the Architecture of 8085 processor.
C302.2	Students will be able to develop skill in programming 8085 processor.
C302.3	Students will be able to study the Architecture of 8051 micro controller.
C302.4	Students will be able to study the commonly used peripheral / interfacing.
C302.5	Students will be able to study the micro controller programming & applications.

C303	EE8552	Power Electronics
C303.1	Students will be able to get an overview of different types of power semiconductor devices and their switching characteristics.
C303.2	Students will be able to understand the operation, characteristics and performance parameters of controlled rectifiers.
C303.3	Students will be able to study the operation, switching techniques and basics topologies of DC-DC switching regulators.
C303.4	Students will be able to learn different modulation techniques of pulse width modulated inverters and to understand the harmonic reduction methods.
C303.5	Students will be able to study the operation of AC voltage controllers and their configurations.

C304	EE8591	Digital Signal Processing
C304.1	Students will be able to classify signals and systems & their mathematical representation.
C304.2	Students will be able to analyse the discrete time systems.
C304.3	Students will be able to study various transformation techniques & their computation.
C304.4	Students will be able to study about filters and their design for digital implementation.
C304.5	Students will be able to study about a programmable digital signal processor & quantization effects.

C305	CS8392	Object Oriented Programming
C305.1	Students will be able to study the overview of object oriented programming.
C305.2	Students will be able to study the basic characteristics of object oriented programming.
C305.3	Students will be able to study the advanced programming methods.
C305.4	Students will be able to study the overview of java.
C305.5	Students will be able to study the exception handling methods.

C306(OEI-4)	OIT551	Database Management Systems
C306 (OEI-4).1	Students will be able to study the fundamentals of data models and conceptual modeling using ER diagrams.
C306 (OEI-4).2	Students will be able to study the SQL queries.
C306 (OEI-4).3	Students will be able to study the database programming.
C306 (OEI-4).4	Students will be able to study the design of relational database.
C306 (OEI-4).5	Students will be able to understand database security concepts and information retrieval techniques.

C306 (OEI-7)	OAN551	Sensors and Transducers
C306 (OEI-7).1	Students will be able to understand various calibration techniques and signal types for sensors.
C306 (OEI-7).2	Students will be able to study the motion, proximity and ranging sensors.
C306 (OEI-7).3	Students will be able to study the force, magnetic and heading sensors.
C306 (OEI-7).4	Students will be able to study the optical, pressure and temperature sensors.
C306 (OEI-7).5	Students will be able to implement the DAQ systems with different sensors for real time applications.

C307	EE8511	Control and Instrumentation Laboratory
C307.1	Students will be able to study about P, PI, PID controllers, stability analysis and to model machines, sensors, transducers and to design lag, lead and lag-lead compensators.
C307.2	Students will be able to study the position control systems and the synchro-transmitter-receiver characteristics.
C307.3	Students will be able to simulate control systems by mathematical development tools.
C307.4	Students will be able to study AC and DC Bridges and the dynamics of Sensors/Transducers.
C307.5	Students will be able to study power and energy measurement, signal conditioning and process simulation.

C308	HS8581	Professional Communication
C308.1	Students will be able to develop soft skills.
C308.2	Students will be able to make effective presentations.
C308.3	Students will be able to participate confidently in Group Discussions.
C308.4	Students will be able to develop their confidence and help them attend interviews successfully.
C308.5	Students will be able to manage time, stress and understand the career management.

C309	CS8383	Object Oriented Programming Laboratory
C309.1	Students will be able to develop and implement Java programs for simple applications that make use of classes and packages.
C309.2	Students will be able to develop and implement Java programs with interfaces and array list.
C309.3	Students will be able to develop and implement Java programs with exception handling and multithreading.
C309.4	Students will be able to design applications using file processing.
C309.5	Students will be able to design applications using generic programming and event handling.

III Year – VI Semester

C310	EE8601	Solid State Drives
C310.1	Students will be able to understand steady state operation and transient dynamics of a motor load system.
C310.2	Students will be able to study and analyze the operation of the converter/chopper fed dc drive, both qualitatively and quantitatively.
C310.3	Students will be able to study and understand the operation and performance of induction motor drives.
C310.4	Students will be able to study and understand the operation and performance of synchronous motor drives.
C310.5	Students will be able to analyze and design the current and speed controllers for a closed loop solid state DC motor drive.

C311	EE8602	Protection and Switchgear
C311.1	Students will be able to study the causes of abnormal operating conditions (faults, lightning and switching surges) of the apparatus and system.
C311.2	Students will be able to study the characteristics and functions of relays.
C311.3	Students will be able to study the apparatus protection.
C311.4	Students will be able to study the static and numerical relays.
C311.5	Students will be able to study the functioning of circuit breakers.

C312	EE8691	Embedded Systems
C312.1	Students will be able to study the building blocks of embedded system.
C312.2	Students will be able to study the embedded networking.
C312.3	Students will be able to study the embedded firmware development environment.
C312.4	Students will be able to study the real time operating system based embedded system design.
C312.5	Students will be able to study the embedded system application and development.

C313(PEI-3)	EE8002	Design of Electrical Apparatus
C313 (PEI-3).1	Students will be able to study the design of field system and armature.
C313 (PEI-3).2	Students will be able to design core, yoke, windings and cooling systems of transformers.
C313 (PEI-3).3	Students will be able to design armature and field systems for D.C. machines.
C313 (PEI-3).4	Students will be able to design stator and rotor of induction machines.
C313 (PEI-3).5	Students will be able to design stator and rotor of synchronous machines

C314(PEII-2)	EE8005	Special Electrical Machines
C314 (PEII-2).1	Students will be able to study the construction, principle of operation, control and performance of stepper motors.
C314 (PEII-2).2	Students will be able to study the construction, principle of operation, control and performance of switched reluctance motors.
C314 (PEII-2).3	Students will be able to study the construction, principle of operation, control and performance of permanent magnet brushless D.C. motors.
C314 (PEII-2).4	Students will be able to study the construction, principle of operation and performance of permanent magnet synchronous motors.
C314 (PEII-2).5	Students will be able to study the construction, principle of operation and performance of other special Machines.

C315	EE8661	Power Electronics and Drives Laboratory
C315.1	Students will be able to get hands on experience in Gate Pulse Generation using R, RC and UJT.
C315.2	Students will be able to study the characteristics of SCR, TRIAC, MOSFET, IGBT, GTO and IGCT.
C315.3	Students will be able to study about AC to DC half and fully controlled converters, step down and step up MOSFET based choppers and IGBT based single and three phase PWM inverters.
C315.4	Students will be able to study about AC Voltage controllers, switched mode power converters and characteristics of PMBLDC motor.
C315.5	Students will be able to study the simulation of power electronic circuits such as single and three phase semi and full converters, dc-dc converters and ac voltage controllers.

C316	EE8681	Microprocessors and Microcontrollers Laboratory
C316.1	Students will be able to study simple arithmetic operations such as addition, subtraction, multiplication and division.
C316.2	Students will be able to study the programming with control instructions, Analog to Digital and Digital to Analog interfacing.
C316.3	Students will be able to study the traffic light controller and I/O Port / Serial communication.
C316.4	Students will be able to study the keyboard and display interface and the programming practices with Simulators, Emulators and open source.
C316.5	Students will be able to study the basic instructions with 8051 micro controller including conditional jumps, looping, calling subroutines and study on interface with A/D, D/A, with DC & AC motors and hardware development using embedded processors.

C317	EE8611	Mini Project
C317.1	Students will be able to develop their own innovative prototype of ideas.
C317.2	Students will be able to take up any challenging practical problems.
C317.3	Students will be able to find solution by formulating proper methodology.
C317.4	Students will be able to prepare project reports.
C317.5	Students will be able to face reviews and viva voce examination.

IV Year-VII Semester

C401	EE8701	High Voltage Engineering
C401.1	Students will be able to understand various types of over voltages and protection methods in power system.
C401.2	Students will be able to study the breakdown mechanisms in solid, liquid and gaseous dielectrics.
C401.3	Students will be able to study the generation of high voltages and high currents.
C401.4	Students will be able to study the measurement of high voltages and high currents.
C401.5	Students will be able to study the testing of power apparatus and insulation coordination.

C402	EE8702	Power System Operation and Control
C402.1	Students will be able to understand the significance of power system operation and control.
C402.2	Students will be able to acquire knowledge on real power-frequency interaction.
C402.3	Students will be able to understand the reactive power-voltage interaction
C402.4	Students will be able to study the economic operation of power system.
C402.5	Students will be able to design SCADA and its application for real time operation.

C403	EE8703	Renewable Energy Systems
C403.1	Students will be able to get awareness about renewable energy sources and technologies.
C403.2	Students will be able to acquire knowledge about wind energy.
C403.3	Students will be able to acquire knowledge about solar energy.
C403.4	Students will be able to understand the basics about biomass energy.
C403.5	Students will be able to acquire knowledge about tidal energy, wave energy, fuel cells and energy storage systems.

C404	OCS752	Introduction to C Programming
C404.1	Students will be able to develop C programs using basic programming constructs.
C404.2	Students will be able to develop C programs using arrays.
C404.3	Students will be able to develop C programs using strings.
C404.4	Students will be able to develop applications in C using functions.
C404.5	Students will be able to develop applications in C using structures.

C405(PEIII-1)	GE8071	Disaster Management
C405 (PEIII-1).1	Students will be able to differentiate the types of disasters, causes and their impact on environment and society.
C405 (PEIII-1).2	Students will be able to study various methods of risk reduction measures as well as mitigation.
C405 (PEIII-1).3	Students will be able to assess vulnerability and understand the inter-relationship between disasters and development.
C405 (PEIII-1).4	Students will be able to draw the hazard and vulnerability profile of India, Scenarious in the Indian context.
C405 (PEIII-1).5	Students will be able to study disaster management: applications, case studies and fieldworks.

C406(PEIV-5)	EE8010	Power System Transients
C406 (PEIV-5).1	Students will be able to have an overview of power system transients.
C406 (PEIV-5).2	Students will be able to understand and analyze the switching transients.
C406 (PEIV-5).3	Students will be able to understand and analyze the lightning transients.
C406 (PEIV-5).4	Students will be able to understand the importance of propagation, reflection and refraction of travelling waves.
C406 (PEIV-5).5	Students will be able to understand the voltage transients caused by faults, concept of circuit breaker action, load rejection on integrated power system.

C407	EE8711	Power System Simulation Laboratory
C407.1	Students will be able to study the computation of transmission line parameters, formation of bus admittance and impedance matrices.
C407.2	Students will be able to study the power flow analysis using Gauss-Seidel and Newton-Raphson methods.
C407.3	Students will be able to study the symmetrical and unsymmetrical fault analysis.
C407.4	Students will be able to study the load – frequency dynamics of single and two-area power systems, transient stability analysis of SMIB system and electromagnetic transients in power systems.
C407.5	Students will be able to study the economic dispatch in power systems and the weighted least square state estimation.

C408	EE8712	Renewable Energy Systems Laboratory
C408.1	Students will be able to simulate the solar PV energy system, wind energy generator and hydel power.
C408.2	Students will be able to simulate the hybrid solar - wind power system and intelligent controllers for hybrid systems.
C408.3	Students will be able to study the VI characteristics, efficiency, shadowing effect and diode based solution of 1kWp solar PV system.
C408.4	Students will be able to study the performance assessment of grid connected and standalone 1kWp solar power system and micro wind energy generator.
C408.5	Students will be able to study the performance assessment of hybrid solar-wind power system and 100W fuel cell.

IV Year – VIII Semester

C409(PEV-6)	GE8076	Professional Ethics in Engineering
C409 (PEV-6).1	Students will be able to study the morals, values and ethics.
C409 (PEV-6).2	Students will be able to study the engineering ethics.
C409 (PEV-6).3	Students will be able to realize engineering as social experimentation.
C409 (PEV-6).4	Students will be able to study about safety, responsibilities and rights.
C409 (PEV-6).5	Students will be able to study the global issues.

C410(PEVI-6)	EI8073	Biomedical Instrumentation
C410 (PEVI-6).1	Students will be able to study the fundamentals of biomedical engineering.
C410 (PEVI-6).2	Students will be able to study the non electrical parameters measurement and diagnostic procedures.
C410 (PEVI-6).3	Students will be able to study the electrical parameters acquisition and analysis.
C410 (PEVI-6).4	Students will be able to study the imaging modalities and analysis.
C410 (PEVI-6).5	Students will be able to get basic knowledge in life assisting, therapeutic and robotic devices.

C410(PEVI-3)	EE8017	High Voltage Direct Current Transmission
C410 (PEVI-3).1	Students will be able to understand the concept, planning of DC power transmission and comparison with AC Power transmission.
C410 (PEVI-3).2	Students will be able to analyze the HVDC converters.
C410 (PEVI-3).3	Students will be able to study about the HVDC system control.
C410 (PEVI-3).4	Students will be able to analyze the harmonics and the design of filters.
C410 (PEVI-3).5	Students will be able to analyze the power flow in HVDC system under steady state.

C411	EE8811	Project Work
C411.1	Students will be able to develop the ability to solve a specific problem right from its identification and literature review till the successful solution of the same.
C411.2	Students will be able to take up any challenging practical problems.
C411.3	Students will be able to find solution by formulating proper methodology.
C411.4	Students will be able to prepare project reports.
C411.5	Students will be able to face reviews and viva voce examination.